? 這次的設計主要是通過讀取DHT11和HCSR04的數值，（Proteus的傳感器貌似這兩款好用一點）把讀取的DHT11和HCSR04數值通過轉化在lcd1602中顯示出來，還有就是可以設置通過按鍵設置DHT11的溫濕度閾值。

仿真原理圖如下
?

?
運行結果圖：
?

按下K1，K2為加1設置，K3為減1設置

?濕度低于88%；警報響，紅燈亮

程序展示：

#include 
#include "delay.h"
#include "DHT11.h"
#include "LCD1602.h"
#include "SOUN.h"
#include "KEY_ExitInit.h"
#include "LED_INIT.h"
#include "HCSR04.h"
unsigned char move = 0x82;
unsigned char RH,RL,TH,TL;
unsigned char h0 = 0X38,h1 = 0X36;
unsigned char t0 = 0X32,t1 = 0X38;
unsigned char DATA[4];//存溫濕度數據
unsigned char Leg[4];//存超聲波
unsigned char R[7] = "SD:";
unsigned char H[7] = "WD:";
unsigned char L[7] = "Legth:";
unsigned char r[2] = "%";
unsigned char h[2] = "C";
////////////////////////// 讀DHT11數據及數據轉換 ///////////////////////////////////////
int DHT11_ReadDATA(void)
{
	int i;

....

可以自己按照這個思路進行自行設計，也可以通過百度網盤列表下載已經做好的 https://www.aiesst.cn/share.html
審核編輯：湯梓紅