資料介紹
The MAX5099 offers a dual-output, high-switching-frequency
DC-DC buck converter with an integrated highside
switch. The MAX5099 integrates two low-side
MOSFET drivers to allow each converter to drive an
external synchronous-rectifier MOSFET. Converter 1
delivers up to 2A output current, and converter 2 can
deliver up to 1A of output current. The MAX5099 integrates
load-dump protection circuitry that is capable of
handling load-dump transients up to 80V for automotive
applications. The load-dump protection circuit utilizes
an internal charge pump to drive the gate of an external
n-channel MOSFET. When an overvoltage or loaddump
condition occurs, the series protection MOSFET
absorbs the high voltage transient to prevent damage
to lower voltage components.
The DC-DC converter operates over a wide 4.5V to 19V
operating voltage range. The MAX5099 operates 180°
out-of-phase with an adjustable switching frequency to
minimize external components while allowing the ability
to make trade-offs between the size, efficiency, and
cost. The high switching frequency also allows these
devices to operate outside the AM band for automotive
applications. These regulators can be protected
against high voltage transients such as a load-dump
condition by using the integrated overvoltage controller.
This device utilizes voltage-mode control for stable
operation and external compensation, so that the loop
gain is tailored to optimize component selection and
transient response. The MAX5099 has a maximum duty
cycle of 92.5% and is synchronized to an external clock
fed at the SYNC input.
Additional features include internal digital soft-start,
individual enable for each DC-DC regulator (EN1 and
EN2), open-drain power-good outputs (PGOOD1 and
PGOOD2), and shutdown input (ON/OFF).
Other features of the MAX5099 include overvoltage protection
and short-circuit (hiccup current limit) and thermal
protection. The MAX5099 is available in a thermally
enhanced, exposed pad 5mm x 5mm, 32-pin TQFN
package and operates over the automotive -40°C to
+125°C temperature range.
DC-DC buck converter with an integrated highside
switch. The MAX5099 integrates two low-side
MOSFET drivers to allow each converter to drive an
external synchronous-rectifier MOSFET. Converter 1
delivers up to 2A output current, and converter 2 can
deliver up to 1A of output current. The MAX5099 integrates
load-dump protection circuitry that is capable of
handling load-dump transients up to 80V for automotive
applications. The load-dump protection circuit utilizes
an internal charge pump to drive the gate of an external
n-channel MOSFET. When an overvoltage or loaddump
condition occurs, the series protection MOSFET
absorbs the high voltage transient to prevent damage
to lower voltage components.
The DC-DC converter operates over a wide 4.5V to 19V
operating voltage range. The MAX5099 operates 180°
out-of-phase with an adjustable switching frequency to
minimize external components while allowing the ability
to make trade-offs between the size, efficiency, and
cost. The high switching frequency also allows these
devices to operate outside the AM band for automotive
applications. These regulators can be protected
against high voltage transients such as a load-dump
condition by using the integrated overvoltage controller.
This device utilizes voltage-mode control for stable
operation and external compensation, so that the loop
gain is tailored to optimize component selection and
transient response. The MAX5099 has a maximum duty
cycle of 92.5% and is synchronized to an external clock
fed at the SYNC input.
Additional features include internal digital soft-start,
individual enable for each DC-DC regulator (EN1 and
EN2), open-drain power-good outputs (PGOOD1 and
PGOOD2), and shutdown input (ON/OFF).
Other features of the MAX5099 include overvoltage protection
and short-circuit (hiccup current limit) and thermal
protection. The MAX5099 is available in a thermally
enhanced, exposed pad 5mm x 5mm, 32-pin TQFN
package and operates over the automotive -40°C to
+125°C temperature range.
下載該資料的人也在下載
下載該資料的人還在閱讀
更多 >
- max3232技術資料下載datasheet 47次下載
- MAX6369–MAX6374 datasheet pdf
- MAX6033 datasheet pdf
- MAX1647,MAX1648 datasheet pdf
- MAX1645,MAX1645A datasheet pdf
- MAX700,MAX701,MAX702 datasheet
- MAX6679 datasheet pdf
- MAX603,MAX604 datasheet pdf
- 長虹|NN5099K電源電路圖
- MAX130, MAX131 pdf datasheet (
- MAX121 pdf datasheet (308ksps
- MAX3244 pdf datasheet (RS-232
- MAX516 pdf datasheet
- MAX514 pdf datasheet
- MAX5099 pdf
- max30100和max30102的區別 5537次閱讀
- 配合MAX9217/MAX9218/MAX9247/MAX9248/MAX9250評估板工作 2642次閱讀
- 分享一個快速閱讀datasheet的方法 2726次閱讀
- 如何閱讀Datasheet,是作為電子工程師的必備技能! 8050次閱讀
- AD9如何簡單快速的制作出原理圖符號 7625次閱讀
- 使用pdf解析可以用來讀取PDF文件中字符串文本,圖片數據 1.3w次閱讀
- max3485與max485區別詳解(解析為什么max3485不能代替max485) 10.2w次閱讀
- MAX232引腳圖功能應用電路 MAX232中文資料PDF數據手冊下載 1.5w次閱讀
- MAX706s_MAX706SESA_MAX706TESA_MAX706PA中文資料PDF英文Datasheet數據手冊 5269次閱讀
- MAX14576,MAX14636,MAX14637 USB充電器檢測器 1812次閱讀
- MAX9039–MAX9043,MAX9050–MAX9053低功耗比較器與精密電壓基準源 1872次閱讀
- MAX5134-MAX5137內最小的16位DAC 1803次閱讀
- MAX4617-MAX4619低電壓、CMOS模擬多路復用器/開關 6307次閱讀
- 如何優化MAX16974-MAX16976的電路布局 2175次閱讀
- MAX5970應用電路 2814次閱讀
下載排行
本周
- 1AN-1267: 使用ADSP-CM408F ADC控制器的電機控制反饋采樣時序
- 1.41MB | 5次下載 | 免費
- 2AN158 GD32VW553 Wi-Fi開發指南
- 1.51MB | 2次下載 | 免費
- 3Multisim的上百個仿真實例資料合集
- 12.34 MB | 1次下載 | 10 積分
- 4嵌入式軟件開發符合ISO 26262 功能安全標準
- 1.61 MB | 1次下載 | 免費
- 5AN148 GD32VW553射頻硬件開發指南
- 2.07MB | 1次下載 | 免費
- 6PZT驅動開關電路
- 0.09 MB | 1次下載 | 免費
- 7選擇DSP處理器ADSP-2101與DSP16A的注意事項
- 728.91KB | 次下載 | 免費
- 8EE-23:AD1847/ADSP-2181環回示例,使用單個索引寄存器實現SPORT自動緩沖
- 22.82KB | 次下載 | 免費
本月
- 1ADI高性能電源管理解決方案
- 2.43 MB | 452次下載 | 免費
- 2免費開源CC3D飛控資料(電路圖&PCB源文件、BOM、
- 5.67 MB | 139次下載 | 1 積分
- 3基于STM32單片機智能手環心率計步器體溫顯示設計
- 0.10 MB | 132次下載 | 免費
- 4美的電磁爐維修手冊大全
- 1.56 MB | 24次下載 | 5 積分
- 5如何正確測試電源的紋波
- 0.36 MB | 19次下載 | 免費
- 6感應筆電路圖
- 0.06 MB | 10次下載 | 免費
- 7LZC3106G高性能諧振控制器中文手冊
- 1.29 MB | 9次下載 | 1 積分
- 8萬用表UT58A原理圖
- 0.09 MB | 9次下載 | 5 積分
總榜
- 1matlab軟件下載入口
- 未知 | 935121次下載 | 10 積分
- 2開源硬件-PMP21529.1-4 開關降壓/升壓雙向直流/直流轉換器 PCB layout 設計
- 1.48MB | 420062次下載 | 10 積分
- 3Altium DXP2002下載入口
- 未知 | 233088次下載 | 10 積分
- 4電路仿真軟件multisim 10.0免費下載
- 340992 | 191367次下載 | 10 積分
- 5十天學會AVR單片機與C語言視頻教程 下載
- 158M | 183335次下載 | 10 積分
- 6labview8.5下載
- 未知 | 81581次下載 | 10 積分
- 7Keil工具MDK-Arm免費下載
- 0.02 MB | 73810次下載 | 10 積分
- 8LabVIEW 8.6下載
- 未知 | 65988次下載 | 10 積分
評論
查看更多